Matrox Mystique G200 Installation Guide download pdf (Page 8)

8 Matrox Graphics Card – Installation Guide

Sound output

Typically, the sound

output from a computer comes from speakers

connected to your sound card. If you prefer,

you can hear or record the sound output from

your computer using the same TV or VCR you

connect to your graphics card. To do this, you

need an audio cable with a stereo jack on one

end and two RCA connectors on the other end.

If you don’t have this type of cable, you can

buy one at most consumer electronics stores.

Plug the stereo-jack end of the audio cable into

the

LINE OUT

*

connector on your sound card.

Plug the other end of the cable into the left (

L)

and right (

R) AUDIO IN connectors of your

video device. For more information, see your

sound card manual.

SCART adapter

Some video devices in

Europe only have SCART connectors. This

type of connector includes video and audio,

whereas composite video or S-video

connectors include only video.

If your TV or VCR only uses a SCART

connector, you need a SCART cable adapter to

connect your computer to that TV or VCR. If

you don’t already have a SCART adapter, you

should be able to purchase one from your local

electronics store. You need a SCART adapter

with 3 connectors – 2 audio and 1 video.

There are different SCART adapters for

composite video and S-video. If you’re not

sure which your TV or VCR supports, see its

manual.

* If your sound card has no

LINE OUT

connector, you can use its

SPKR

connector instead. In this case, all your

computer’s sound output goes to the video device you connected to.

TV or VCR

Sound

card

S-video SCART

adapter with

3 connectors

Composite SCART

adapter with

3 connectors

SCART connector

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 48 49

Comments to this Manuals

No comments