Matrox Avio F125 User's Guide download pdf (Page 25)

Matrox Avio Series – User Guide 25

EDID management

This menu allows to select which EDID settings are provided to your host system by your

transmitter and receiver units. Your Avio product supports two (2) EDID modes:



Active

– Uses the EDID settings of the monitor on the connector. While using this mode,

the EDID settings of the monitor connected to your receiver unit are used first. If no

monitor is detected on your receiver unit (for example, your monitor or optical cable is

disconnected), the settings of the monitor connected to your transmitter unit are used.

Disconnecting your optical cable has the same effect as disconnecting the monitors on

your receiver unit.

To manually reset EDID management to use this mode, press and hold the Up ( )

button, then press the [Reset] button with the tip of a paperclip.



Fixed

– Uses the EDID settings for a selected resolution and refresh rate, or uses the

EDID settings from a monitor connected to your transmitter or receiver unit. The EDID

settings are stored on your transmitter unit. These settings are used until you update

them or until you change the EDID mode.

Disconnecting your optical cable has no effect as the EDID settings for your monitors are

always the settings saved on your transmitter unit.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 44 45

No comments

Matrox Avio F125 User's Guide Page 25